Home » » Make It Yourself PVC Pergola for Wedding Dance Floor

Make It Yourself PVC Pergola for Wedding Dance Floor

Written By Unknown on Sabtu, 12 Oktober 2013 | 11.16

Make It Yourself PVC Pergola for Wedding Dance Floor

Many couples who desire to create an outdoor wedding rent or purchase a portable dance floor. A dance floor provides a sturdy, stable surface in an outdoor environment. However, a wedding dance floor may need a little something to add style, flair, and a bit of shade from the bright sun. Here you will learn how to create a PVC pergola that will install over your wedding dance floor.

Instructions

    1

    Measure a 10 x 10 foot square in the location where your dance floor will be installed. Use the landscaping stakes to mark the corners. Make sure the space is square, meaning all corners are 90 degrees. One easy way to determine this is by using the "3-4-5" rule. Measure three feet in from one corner and make a mark; measure four feet in the other direction from the corner and mark. Measure the distance from one mark across to the other; the distance should be 5 feet. Adjust as necessary.

    2

    Measure the two sides, placing two additional stakes equidistant from each other and the corners. The stakes will be placed at approximately 3 feet, 4 inches and 6 feet, 8 inches. This will mark the locations of the canopy footings on the sides of the pergola. The front and back sides of the pergola will not have canopy footings.

    3

    Cut 12 pieces of PVC pipe to 40 inches each. Assemble the top of the pergola on the level ground, laying out these twelve pieces (3 on each side). Add the 3-way connectors at the corners and the tee connectors between the pieces on the front and back sides. Lay the 4-way connectors between the pieces on the sides of the pergola. Put all of the pieces together with the 3-ways and 4-ways pointing up and the tee-connectors pointing in.

    4

    Tie a string across the square from each of the tee connectors, making a grid of 9 squares. Place the cross connectors where the strings intersect. Measure the distance between the tee connectors and the cross connectors (and from cross connector to cross connector). Cut poles to fit each measurement. The measurement of each should be about 40 inches, depending on the actual width of the connectors.

    5

    Dry fit all of the pieces together, creating the grid-style roof of the pergola. Glue together the PVC roof, following the PVC primer and glue instructions. This glue is permanent, so make sure everything fits well before beginning the process. Allow the glue to dry for 24 hours before moving on.

    6

    Cut eight PVC poles at 8 foot lengths. These will serve as your side footings or colonnades. Glue these poles in the corner and side connectors (they will be pointing up, as you are assembling the pergola upside down). Allow the glue to dry for 24 hours.

    7

    Place canopy foot pads by each landscape stake. With a helper (or two) carefully lift the structure and tip it upright. Place each colonnade into a footer pad and glue in place (allow 24 hours to dry).

    8

    Drive landscape spikes into the holes of the footer pads, securing them to the ground. Install your dance floor beneath the pergola. Decorate the poles and roof of pergola as desired.


  • The Complete Home DIY Guide: a do-it-yourself home

    www.completediyguide.com

    A clear, easy-to-follow, one-page list of over 550 of the best do-it-yourself (DIY) websites, carefully compiled by hand. Regularly checked and updated.

  • How to Make a PVC Gazebo eHow

    www.ehow.com Special Outdoor Projects

    How to Make a PVC Gazebo. PVC is light and can be assembled fairly quickly using adhesives and connectors. However, PVC structures are easily blown over in the wind ...

  • Craft Projects: Easy Craft Ideas, Kids Crafts, & Holiday Crafts

    www.diynetwork.com/topics/crafting/index.html

    Find easy crafts, kids crafts, and holiday craft ideas from the experts at DIYNetwork.com.

  • Dancing on Bad Floors - Gotta Dance

    www.gottadance.org/bad_floor_dancing.shtml

    How to Dance on a Bad Dance Floor (Without Killing Yourself, Your Knees, or Anyone Else)

  • Dance Flooring Dance Floor Marley Dance Floors Greatmats

    www.greatmats.com/athletic-mats-and-flooring/dance-floors

    Dance flooring options for professional dance studios and portable dance floors. Choose marley dance flooring by Rosco and snap together portable floor at the best ...

  • Better Homes and Gardens - Do-It-Yourself Decorating

    www.bhg.com Decorating

    Do-it-yourself decorating allows you to customize your home, apartment, condo, or room with DIY accents that transform your space on a budget without completing a ...

  • Crafts - Creativebug - Do-it-Yourself Wedding Decorations and ...

    crafts.creativebug.com Seasons & Occasions

    Decorating the wedding yourself gives you the chance to create a personalized look. wedding decor image by Andrius Grigaliunas from Fotolia.com

  • Do It Yourself

    www.doityourself.comBathrooms Gardening & Outdoor Interior Home Improvement Plumbing

    Do it yourself home improvement and diy repair at Doityourself.com. Includes home improvement projects, home repair, kitchen remodeling, plumbing, electrical ...

  • How to Build an Outdoor Dance Floor eHow

    www.ehow.com Home & Garden Building & Remodeling Floors

    How to Build an Outdoor Dance Floor. There are a number of places that you can rent an outdoor dance floor, but you can also make one yourself with some time and ...

Share this article :

0 komentar:

Posting Komentar

 
Support : Your Link | Your Link | Your Link
Copyright © 2013. Gazebo - All Rights Reserved
Template Created by Creating Website Published by Mas Template
Proudly powered by Blogger